5.563" Conrod with small end bush fitted.

We made these as part of a kit for an improved Trials crankshaft to replace late B40 and C15 Cranks.

Also to be used in an ongoing Small Crank Race project.

This Conrod can be fitted with a Big End bearing and pin from our B50 replacement competition Conrods. This will enable you to use it in late B40 flywheels. Be aware that this will increase the width of the crank by 1mm. The crank will need reducing in width at the bearing faces to allow it to fit.

Can be used with E58A PES 35mm B50 big end pin 71-1616A with nuts and PES0008 35mm OD silver plated big end bearing 35x42x20

This conrod has a sizing allowance dependent on the big end bearing and pin used.

If purchased on its own we can size to your bearing and pin if you send it in.

Supplied on its own, you will be required to size it.